Scalecoat II 10568 Paint Stripper / Remover for Plastics

16oz (473mL) Bottle

Scalecoat II is a solvent based enamel paint that is designed for use on Plastic without use of a primer.

Scalecoat II Wash Away Paint Stripper/Remover for Plastics 16 oz.

RECOMMENDED for PLASTIC WASH AWAY PAINT REMOVER is reusable! This paint remover will not craze or warp plastic providing these instructions are followed.

1. At room temperature immerse item to be stripped in Wash Away for 10 minutes.
2. Remove and scrub vigorously under warm tap water with fine bristle hand or tooth brush.
3. Rinse thoroughly.
4. Repeat process if paint remains in tiny crevices.
5. Allow to air dry 24 hours before painting. To remove just the lettering, brush on Wash Away & immediately wash off before remover starts acting on the paint. Close container after each use.

Scalecoat I & II Paints have become a favorite of many model railroaders!

Part Numbers: 640-10568 SCP-10568 SCP10568 SC SCP 10568